EQP-1 Manual Pellet Press

• hydraulic pellet press, manual operation
• pressure up to 20 tons
• for pellets with diameter 32 mm or 40 mm
• compact dimensions 22 x 23 x 50 cm
• low weight 20 kgs

EQP-100 Automatic Pellet Press

• automatic hydraulic press for high-quality homogeneous pellets
• five programs can be memorized with individual pressure force regulation and pressing times
• increase, holding and decrease of pressure are programmable in individual steps
• for pellets with diameter 40 mm
• pressure up to 50 tons
• piston speed steplessly adjustable
• digital display for easy memorization and selection of all program parameters
• small footprint 51 x 42 x 40 cms
• weight 75 kgs

EQP-200 Automatic Pellet Press

• automatic hydraulic press for high-quality homogeneous pellets
• five programs can be memorized with individual pressure force regulation and pressing times
• increase, holding and decrease of pressure are programmable in individual steps
• easily exchangeable pressing tools
• for pellets with diameter 32 or 40 mm as well as further applications
• pressure up to 50 tons
• piston speed steplessly adjustable
• digital display for easy memorization and selection of all program parameters
• small footprint 51 x 42 x 40 cms
• weight 75 kgs

EQM-402 Ball Mixer Mill

• crushing, milling, blending and homogenization of up to 15 g sample material
• low noise level during operation
• parallel processing of two samples
• five independent working programs selectable on touchscreen
• mills from initial granulometry of 0.8 to 1.5 mm up to final granulometry of < 10 μm
• grinding jar volume 25 ml or 50 ml
• ball diameter 10, 15, 20 or 25 mm
• grinding tools - depending on samples - available from hardened steel, tungsten carbide or other materials
• vibration frequency steplessly adjustable up to 2.000 RPM
• grinding time individually selectable from 0 up to 99 minutes
• small footprint 32 x 35 x 24 cms
• weight 13 kgs

EQR-100 Vibratory Disc Mill

• friction, mixing and grinding of a great variety of samples
• special soundproof construction
• anti vibration system
• five working programs with individual speeds and duration can be memorized
• grinding from 15 mm initial grain size to final granulometry of < 50 μm
• vibration frequency 700 up to 2000 RPM, steplessly adjustable
• significant low grinding time
• grinding tools - depending on samples - available from hardened steel, tungsten carbide or other materials
• grinding jar volume 100 ml or 200 ml
• dimensions 80 x 60 x 104 cms
• weight 250 kgs

MultiEQP-100 Modular Processing System

- cutting, pressing, crushing and punching of

• metallic samples
• powders for pellets for XRF analysis
• pins for ONH analysis in elemental analyzers

- up to three 50 tons presses with individual tools for different applications:

• pellets with 40 mm diameter for XRF analysis
• three pins simultaneously with 6 mm diameter (others on request) for ONH analysis
• cutting of bars with up to 30 mm diameter
• flat crushing, surface diameter 53 mm

- controls by touchscreen and intuitive software
- possible addition of sensors at the pistons for automation of working cycles

EQH-3.0 Induction Heater

• induction heater for foundries or steel works
• within seconds, metallic samples are prepared for cutting, crushing or punching
• five independent working programs selectable
• digital display for easy memorization and selection of all program parameters
• adjustable heating speed
• small footprint 51 x 42 x 40 cms
• weight 12 kgs